DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS

DIRECTOR'S OFFICE

GENERAL INDUSTRY SAFETY STANDARDS

(By authority conferred on the director of the department of licensing and regulatory

affairs by sections 16 and 21 of 1974 PA 154, MCL 408.1016 to 408.1021, and Executive

Reorganization Order Nos. 1996-2, 2003-1, 2008-4, and 2011-4, MCL 445.2001,

445.2011, 445.2025, and 445.2030)

PART 76. SPRAY FINISHING USING FLAMMABLE AND COMBUSTIBLE

MATERIALS

R 408.17601 Adoption of standards by reference.

Rule 7601. (1) The following federal occupational safety and health administration

(OSHA) regulations are adopted by reference in these rules:

(a) 29 C.F.R. §1910.107 “Spray finishing using flammable and combustible

materials,” effective March 26, 2012.

(b) 29 C.F.R. §1910.94(c) “Ventilation for spray finishing operations,” effective

September 9, 2009.

(2) All of the following provisions apply with respect to the regulations adopted in

subrule (1) of this rule:

(a) A reference to Subpart S means General Industry Safety Standard Part 39

“Design Safety Standards for Electrical Systems,” and General Industry Safety Standard

Part 40 “Electrical Safety-Related Work Practices,” as referenced in R 408.17602.

(b) A reference to 29 C.F.R. §1910.106 “Flammable liquids,” means General

Industry Safety Standard Part 75 “Flammable Liquids,” as referenced in R 408.17602.

(c) A reference to 29 C.F.R. §1910.159 “Automatic sprinkler systems,” means

General Industry Safety Standard Part 9 “Fixed Fire Equipment” as referenced in

R 408.17602

(d) A reference to “Dip Tank Operations” means Occupational Health Standard Part

526 “Dipping and Coating Operations,” as referenced in R 408.17602.

(3) The provisions of 29 C.F.R. §1910.107 and 29 C.F.R. §1910.94 have the same

force and effect as rules promulgated under 1974 PA 154, the Michigan Occupational

Safety and Health Act (MIOSHA), MCL 408.1001 to 408.1094.

(4) The standards adopted in subrule (1) of this rule are available from the United

States Department of Labor, Occupational Safety and Health Administration website:

www.osha.gov, at no charge as of the time of adoption of these rules.

(5) The standards adopted in subrule (1) of this rule are also available for inspection

at the Department of Licensing and Regulatory Affairs, MIOSHA Standards Section,

7150 Harris Drive, Lansing, Michigan, 48909-8143.

Page 1

Courtesy of www.michigan.gov/orr

(6) The standards adopted in subrule (1) of this rule may be obtained from the

publisher or may also be obtained from the Department of Licensing and Regulatory

Affairs, MIOSHA Standards Section, 7150 Harris Drive, P.O. Box 30643, Lansing,

Michigan, 48909-8143, plus $20.00 for shipping and handling.

History: 1989 AACS; 2007 AACS; 2014 AACS.

R 408.17602 MIOSHA referenced standards.

Rule 7602. The following Michigan occupational safety and health (MIOSHA)

standards are referenced in these rules. Up to 5 copies of these standards may be

obtained at no charge from the Michigan Department of Licensing and Regulatory

Affairs, MIOSHA Standards Section, 7150 Harris Drive, P.O. Box 30643, Lansing,

Michigan,

48909-8143

or

via

the

internet

at

website:

www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, as of the

time of adoption of these rules, is 4 cents per page.

(a) General Industry Safety Standard Part 9 “Fixed Fire Equipment,” R 408.10901 to

R 408.10999.

(b) General Industry Safety Standard Part 39 “Design Safety Standards for Electrical

Systems,” R 408.13901 to R 408.13902.

(c) General Industry Safety Standard Part 40 “Electrical Safety-Related Work

Practices,” R 408.14001 to R 408.14009.

(d) General Industry Safety Standard Part 75 “Flammable Liquids,” R 408.17501 to

R 408.17502.

(e) Occupational Health Standard Part 526 “Dipping and Coating Operations,”

R 325.52601 to R 325.52602.

History: 1989 AACS; 2007 AACS; 2014 AACS.

R 408.17603 Rescinded.