DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS  
DIRECTOR'S OFFICE  
GENERAL INDUSTRY SAFETY AND HEALTH STANDARD  
(By authority conferred on the director of the department of licensing and regulatory  
affairs by sections 16 and 21 of 1974 PA 154, MCL 408.1016 and 408.1021, and  
Executive Reorganization Order Nos. 1996-2, 2003-1, 2008-4, and 2011-4, MCL  
445.2001, 445.2011, 445.2025, and 445.2030)  
GENERAL INDUSTRY SAFETY AND HEALTH STANDARD  
PART 25. MANLIFTS  
R 408.12501 Adoption of federal standard.  
Rule 2501. (1) The federal Occupational Safety and Health Administration (OSHA)  
regulation 29 C.F.R. §1910.68, “Manlifts,” as amended November 18, 2016, is adopted  
by reference in these rules.  
(2) The availability information for the OSHA standard adopted in these rules is in  
R 408.41205 and MIOSHA standards referenced in these rules is in R 408.12510.  
(3) A reference to 29 C.F.R. §1910, Subpart D “Walking-Working Surfaces,” means  
General Industry Safety and Health Standard Part 2 “Walking-Working Surfaces.”  
(4) A reference to ANSI standard A90.1 “Manlifts,” 1969 edition, means this  
standard.  
(5) A reference to either of the following means General Industry Safety Standard  
Part 7 “Guards for Power Transmission:”  
(a) ANSI standard B15.1 “Safety Code for Mechanical Power Transmission  
Apparatus,” 1958 edition.  
(b) 29 C.F.R. §1910, Subpart O, “Machinery and Machine Guarding.”  
(6) A reference to 29 C.F.R. §1910, Subpart S, “Electrical,” means both of the  
following:  
(a) General Industry Safety Standard Part 39 “Design Safety Standards for Electrical  
Systems.”  
(b) General Industry Safety Standard Part 40 “Safety-Related Work Practices.”  
(7) The adopted federal regulations shall have the same force and effect as a rule  
promulgated under the Michigan Occupational Safety and Health Act, 1974 PA 154,  
MCL 408.1001 to 408.1094.  
History: 1982 AACS; 1997 AACS; 2016 AACS; 2018 AACS.  
Editor's Note: An obvious error in R 408.12501 was corrected at the request of the promulgating  
agency, pursuant to Section 56 of 1969 PA 306, as amended by 2000 PA 262, MCL 24.256. The rule  
containing the error was published in Annual Administrative Code Supplement, 2018. The memorandum  
requesting the correction was published in Michigan Register, 2019 MR 9.  
Page 1  
Courtesy of www.michigan.gov/orr  
R 408.12505 Availability of OSHA adopted standard.  
Rule 2505. (1) The standard adopted in these rules is available from the United  
States Department of Labor, Occupational Safety and Health Administration website:  
www.osha.gov, at no charge, as of the time of adoption of these rules.  
(2) The standard adopted in these rules is available for inspection at the Department  
of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West  
Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143.  
(3) The standard adopted in these rules may be obtained from the publisher or may  
be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA  
Regulatory Services Section, 530 West Allegan Street, P.O. Box 30643, Lansing,  
Michigan, 48909-8143, at the cost charged in this rule, plus $20.00 for shipping and  
handling.  
History: 2016 AACS.  
R 408.12510 Availability of MIOSHA referenced standards.  
Rule 2510. The following Michigan Occupational Safety and Health Administrative  
(MIOSHA) standards are referenced in these rules. Up to 5 copies of these standards  
may be obtained at no charge from the Michigan Department of Licensing and  
Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street,  
P.O. Box 30643, Lansing, Michigan, 48909-8143 or via the internet at website:  
www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, as of the  
time of adoption of these rules, is 4 cents per page.  
(a) General Industry Safety and Health Standard Part 2 “Walking-Working  
Surfaces,” R 408.10201 to R 408.10241.  
(b) General Industry Safety Standard Part 7 “Guards for Power Transmission,”  
R 408.10701 to R 408.10765.  
(c) General Industry Safety Standard Part 39 “Design Safety Standards for Electrical  
Systems,” R 408.13901 to R 408.13905.  
(d) General Industry Safety Standard Part 40 “Safety-Related Work Practices,”  
R 408.14001 to R 408.14009.  
History: 2016 AACS; 2018 AACS.  
Page 2  
Courtesy of www.michigan.gov/orr  
;