(a) General Industry Safety Standard Part 12. “Welding and Cutting.”
(b) General Industry Safety and Health Standard Part 529. “Welding, Cutting, and
Brazing.”
(6) A reference to 29 CFR part 1910, subpart D means General Industry Safety and
Health Standard Part 2. “Walking-Working Surfaces.”
(7) A reference to 29 CFR part 1910, subpart Z means Occupational Health
Standard Part 301. “Air Contaminants for General Industry.”
(8) The adopted federal regulations have the same force and effect as a rule
promulgated under the Michigan occupational safety and health act, 1974 PA 154, MCL
408.1001 to 408.1094.
(9) The OSHA regulations adopted in these rules are available from the United
States Department of Labor, Occupational Safety and Health Administration website,
www.osha.gov, at no charge, as of the time of adoption of these rules.
(10) The regulations adopted in these rules are available for inspection at the
Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section,
530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143.
(11) The regulations adopted in these rules may be obtained from the publisher or
the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services
Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143, at
the cost charged in this rule, plus $20.00 for shipping and handling.
(12) The following Michigan Occupational Safety and Health Administration
(MIOSHA) standards are referenced in these rules. Up to 5 copies of these standards
may be obtained at no charge from the Michigan Department of Licensing and
Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street,
P.O. Box 30643, Lansing, Michigan, 48909-8143 or via the internet at the following
of the time of adoption of these rules, is 4 cents per page.
(a) General Industry Safety Standard Part 12. “Welding and Cutting,” R 408.11201
to R 408.11299.
(b) General Industry Safety and Health Standard Part 2. “Walking-Working
Surfaces,” R 408.10201 to R 408.10241.
(c) General Industry Safety and Health Standard Part 6. “Fire Exits,” R 408.10601 to
R 408.10697.
(d) Occupational Health Standard Part 301. “Air Contaminants for General
Industry,” R 325.51101 to R 325.51107.
(e) General Industry Safety and Health Standard Part 529. “Welding, Cutting, and
Brazing,” R 325.52901 to R 325.52931.
(f) Occupational Health Standard Part 451. “Respiratory Protection,”
R 325.60051 to R 325.60052.
History: 2014 AACS; 2018 AACS.
R 408.17701b Rescinded.
History: 2014 AACS; 2018 AACS.
Page 2