DEPARTMENT OF LABOR AND ECONOMIC OPPORTUNITY  
DIRECTOR’S OFFICE  
CONSTRUCTION SAFETY AND HEALTH STANDARD  
(By authority conferred on the director of the department of labor and economic  
opportunity by sections 19 and 21 of the Michigan occupational safety and health act,  
1974 PA 154, MCL 408.1019 and 408.1021, and Executive Reorganization Order Nos.  
1996-2, 2003-1, 2008-4, 2011-4, and 2019-3, MCL 445.2001, 445.2011, 445.2025,  
445.2030, and 125.1998)  
PART 13. MOBILE EQUIPMENT  
R 408.41301 Adoption and availability of standards.  
Rule 1301.  
(1)  
The following federal Occupational Safety and Health  
Administration (OSHA) regulations, in 29 CFR part 1926, subpart O, “Motor Vehicles,  
Mechanized Equipment, and Marine Operations,” are adopted by reference in these rules:  
(a) 29 CFR 1926.600, “Equipment,” effective August 9, 2010.  
(b) 29 CFR 1926.601, “Motor vehicles,” effective December 6, 2012.  
(c) 29 CFR 1926.602, “Material handling equipment,” effective December 1,  
1998, including 29 CFR 1910.178, appendix A “Powered industrial trucks (non-  
mandatory),” effective November 18, 2016.  
(d) 29 CFR 1926.603, “Pile driving equipment,” effective January 19, 2005.  
(e) 29 CFR 1926.604, “Site clearing,” effective March 14, 2001.  
(f) 29 CFR 1926.605, “Marine operations and equipment,” effective July 22, 1977.  
(g) 29 CFR 1926.606, “Definitions applicable to this subpart,” effective March 14,  
2001.  
(2) The following OSHA regulations, in 29 CFR part 1926, subpart W, “Rollover  
Protective Structures; Overhead Protection,” are adopted by reference in these rules:  
(a) 29 CFR 1926.1000, “Scope,” effective May 14, 2019.  
(b) 29 CFR 1926.1001, “Minimum performance criteria for rollover protective  
structures for designated scrapers, loaders, dozers, graders, crawler tractors, compactors,  
and rubber-tired skid steer equipment,” effective May 14, 2019.  
(c) 29 CFR 1926.1002, “Protective frames (roll-over protective structures, known as  
ROPS) for wheel-type agricultural and industrial tractors used in construction,” effective  
May 14, 2019.  
(d) 29 CFR 1926.1003, “Overhead protection for operators of agricultural and  
industrial tractors used in construction,” effective May 14, 2019.  
(3) A reference to 1926.2 means MIOSHA Safety and Health Standard Part 12.  
“Variances.”  
(4) A reference to 29 CFR part 1926, subpart K, “Electrical,” means all of the  
following:  
(a) Construction Safety and Health Standard Part 10. “Cranes and Derricks.”  
Page 1  
(b) Construction Safety Standard Part 17. “Electrical Installations.”  
(5) The OSHA regulations adopted in these rules are available from the United  
States Department of Labor, Occupational Safety and Health Administration website:  
(6) The standards adopted in these rules are available for inspection at the  
Department of Labor and Economic Opportunity, MIOSHA Standards and FOIA Section,  
530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143.  
(7) The standards adopted in these rules may be obtained from the publisher or may  
be obtained from the Department of Labor and Economic Opportunity, MIOSHA  
Standards and FOIA Section, 530 West Allegan Street, P.O. Box 30643, Lansing,  
Michigan, 48909-8143, at the cost charged in this rule, plus $20.00 for shipping and  
handling.  
(8) The following Michigan occupational safety and health administration standards  
(MIOSHA) are referenced in these rules. Up to 5 copies of these standards may be  
obtained at no charge from the Michigan Department of Labor and Economic  
Opportunity, MIOSHA Standards and FOIA Section, 530 West Allegan Street, P.O. Box  
30643, Lansing, Michigan, 48909-8143 or via the internet at website:  
www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, at the time  
of adoption of these rules, is 4 cents per page.  
(a) Construction Safety and Health Standard Part 1. “General Rules,” R 408.40101  
to R 408.40134.  
(b) Construction Safety and Health Standard Part 6. “Personal Protective  
Equipment,” R 408.40601 to R 408.40660.  
(c) Construction Safety and Health Standard Part 10. “Cranes and Derricks,” R  
408.41001 to R 408.41099a.  
(d) Construction Safety Standard Part 15. “Excavators, Hoists, Elevators,  
Helicopters, and Conveyors,” R 408.41501 to R 408.41595.  
(e) Construction Safety Standard Part 17. “Electrical Installations,” R 408.41701  
to R 408.41734.  
(f) MIOSHA Safety and Health Standard Part 12. “Variances,” R 408.22201 to R  
408.22251.  
(g) General Industry Safety and Health Standard Part 21. “Powered Industrial  
Trucks,” R 408.12101 to R 408.12193.  
(h) Occupational Health Standard Part 504. “Diving Operations,” R 325.50301 to  
R 325.50348.  
(9) A reference to 29 CFR part 1926, subpart N, “Helicopters, Hoists, Elevators,  
and Conveyors,” means this standard and both of the following:  
(a) Construction Safety and Health Standard Part 10. “Cranes and Derricks.”  
(b) Construction Safety Standard Part 15. “Excavators, Hoists, Elevators,  
Helicopters, and Conveyors.”  
(10) A reference to 29 CFR part 1926, subpart W, “Rollover Protective Structures;  
Overhead Protection,” means this standard and both of the following:  
(a) Construction Safety and Health Standard Part 10. “Cranes and Derricks.”  
(b) Construction Safety Standard Part 15. “Excavators, Hoists, Elevators,  
Helicopters, and Conveyors.”  
Page 2  
(11) A reference to 29 CFR part 1910, subpart N, “Materials Handling and  
Storage,” means General Industry Safety and Health Standard Part 21. “Powered  
Industrial Trucks.”  
(12) A reference to 29 CFR part 1910, subpart T, “Commercial Diving Operations,”  
means Occupational Health Standard Part 504. “Diving Operations.”  
(13) The adopted federal regulations have the same force and effect as a rule  
promulgated under the Michigan occupational safety and health act (MIOSHA), 1974 PA  
154, MCL 408.1001 to 408.1094.  
History: 1979 AC; 1983 AACS; 1997 AACS; 1998-2000 AACS; 2021 MR 11, Eff. June 11, 2021.  
Page 3  
;