comply with applicable Federal Railroad Administration requirements. See 29 CFR
1926.1402(f).
(9) The following federal Occupational Safety and Health Administration (OSHA)
regulations are adopted by reference in these rules:
(a) 29 CFR part 1926, subpart CC, “Cranes and Derricks in Construction,” 29 CFR
1926.1400 to 1926.1442, as amended November 16, 2020, except 29 CFR
1926.1400(c)(16) is not adopted, and as specified in subrules (e) and (f) of this rule.
(b) 29 CFR part 1926, subpart CC, appendix A “Standard Hand Signals,” as amended
August 9, 2010.
(c) 29 CFR part 1926, subpart CC, appendix B “Assembly/Disassembly--Sample
Procedures for Minimizing the Risk of Unintended Dangerous Boom Movement,” as
amended August 9, 2010.
(d) 29 CFR part 1926, subpart CC, appendix C “Operator Certification--Written
Examination--Technical Knowledge Criteria,” as amended August 9, 2010.
(e) 29 CFR 1926.1427, “Operator training, certification, and evaluation,” as amended
November 9, 2018.
(f) 29 CFR 1926.1430, “Training,” as amended November 9, 2018.
(10) A reference to 29 CFR 1926.251 means Construction Safety and Health Standard
Part 8. “Handling and Storage of Materials.”
(11) A reference to 29 CFR 1926.959 and 1926.960 means Construction Safety Standard
Part 16. “Power Transmission and Distribution.”
(12) A reference to 29 CFR part 1926, subpart R means Construction Safety Standard Part
26. “Steel Erection,” and Construction Safety Standard Part 28. “Personnel Hoisting in
Steel Erection.”
(13) A reference to 29 CFR 1926.500 and 1926.502 means Construction Safety Standard
Part 45. “Fall Protection.”
(14) A reference to 29 CFR 1926.106 means Construction Safety and Health Standard
Part 6. “Personal Protective Equipment.”
(15) A reference to 29 CFR 1910.268 means Construction Safety and Health Standard
Part 30. “Telecommunications for Construction.”
(16) A reference to 29 CFR 1910.179 means General Industry Safety and Health Standard
Part 18. “Overhead and Gantry Cranes.”
(17) A reference to 29 CFR 1910.147 means General Industry Safety and Health Standard
Part 86. “Electric Power Generation, Transmission, and Distribution.”
(18) The adopted federal regulations have the same force and effect as a rule promulgated
under the Michigan occupational safety and health act, 1974 PA 154, MCL 408.1001 to
408.1094.
(19) The OSHA regulations adopted in these rules are available from the United States
Department of Labor, Occupational Safety and Health Administration website,
www.osha.gov, at no charge, as of the time of adoption of these rules.
(20) A reference to the American National Standards Institute Standard ANSI B30.5-1968
in 29 CFR 1926.1433(a) means ANSI B30.5, “Mobile and Locomotive Cranes,” 1994
edition, which is adopted by reference in these rules. This standard is available from IHS
Global, 15 Inverness Way East, Englewood, Colorado, 80112, USA, telephone number:
of adoption of these rules of $119.00.
Page 4
